Vibration Meter, Analyzer and Data Collector all just in one machine
SpecificationsGalleryDownloads
Call: +880 1913303031 | Email: pdm.alpha@gmail.com
Vibration Meter, Analyzer and Data Collector all just in one machine
Input:
1 x ICP® powered accelerometer
Input range:
60 g PEAK with standard 100 mV/g sensor
e.g. 600 g PEAK with 10 mV/g sensor (sensitivity is adjustable in the device)
Measurements:
Velocity RMS: 10 – 1 000 Hz [mm/s, ips]
Velocity Peak: 10 – 1 000 Hz [mm/s, ips]
Acceleration RMS: 500 – 16 kHz [g]
Acceleration Peak: 500 – 16 kHz [g]
Velocity time: 1 – 1 000 Hz [mm/s, ips], 2048 samples
Velocity spectrum: 1 – 1 000 Hz [mm/s, ips], 800 lines
Acceleration time: 1 – 16 kHz [g], 2048 samples*
Acceleration spectrum: 1 – 16 kHz [g], 800 lines*
Acceleration Demod-Envelope RMS: 500 – 16 kHz [g]
Acceleration Demod-Envelope Peak: 500 – 16 kHz [g]*
Acceleration Demod-Envelope time: 500 – 16 kHz [g], 2048 samples
Acceleration Demod-Envelope spectrum: 500 – 16 kHz [g], 800 lines, range 400 Hz*
Displacement RMS: 2 – 100 Hz [µm, mil]
Displacement 0-Peak: 2 – 100 Hz [µm, mil]
Displacement Peak-Peak: 2 – 100 Hz [µm, mil]
* available in DDS software for Vibrio
IR temperature measurement:
From -70˚C to +380˚C (-94˚F to +716˚F)
Other functions:
LED stroboscope (0.17-300 Hz, 10 – 18 000 RPM)
LED torch
Stethoscope for listening machine (bearing) noises
Memory:
4 MB for data:
120960 overall values
or 900 measurements of 800 line spectra
or 2048 sample time signals
Data storing:
Off-Route Route with DDS software (free download)
Interface:
USB 3.0, 2.0 compatible
Software:
Free version of DDS software (limited database size)
Display:
Colour graphic OLED display 128×128 pixels,
diagonal 1.5“ (38 mm)
Output:
1 x AC signal 8 Ω / 0,5 W for external headphones
(signal listening)
Power:
2 x AA 1.5V batteries
(alkaline, NiMH, Lithium – 8 hours of operation)
Temperature:
Operating: -5°C to 55°C
Dimensions:
150 x 60 x 35 mm
Weight:
330 g including batteries (without cable, sensor and magnet)
540 g including batteries, cable, sensor and magnet
Accessories:
vibration sensor, coiled cable to connect vibration sensor, magnetic base for vibration sensor, headphones with 3.5 mm jack, USB cable, measuring tip for manual pressure on the sensor, transport case, USB flash drive with the manual